Amigurumi Elf Bull Free Crochet Pattern

Master class “Elf goby

You can browse our website for amigurumi elf bull and more free patterns.

Note.

In this master class, the technique of knitting “half-crosses” is used. If you knit in a different way, then you need to independently adjust the position of the marker, aligning it.

A toy without a frame, a head on a cotter pin (you can use a button fastening, or just sew on). Legs, arms and tail are knitted. Horns and ears are sewn on.

If it is not specified what increase / decrease is, then an increase / decrease sc is made.

The master class does not contain training materials.

Difficulty: medium.

Necessary materials:

1. YarnArt Elite yarn colors: 217 (dark brown), 805 (sand), 41 (red), 248 (green), 150 (white).

2. Hook number 2.

3. A needle with a wide eye for sewing parts.

4. Holofiber.

5. Eyes on a secure mount 10mm.

6. A piece of white felt for the eyes.

7. Cotter pin 25mm, 2 discs for a cotter pin with a diameter of 25mm, 2 washers with a diameter of about 10mm.

8. A small piece of green satin ribbon for tying to a bouquet (about 15 cm).

The size of the toy depends on the knitting density and the thickness of the yarn used. When using these materials, the growth of the bull is 31 cm.

Legend:

Ch – air loop

SL-ST – connecting post

Sc – single crochet

Hdc – half double crochet

Blo – back half of the hinge

Flo – front half of the hinge

İnc – increase (knit 2 columns in 1 loop)

Dec – decrease (knit 2 stitches together)

Turn. – rotate knitting

“*” – repeat the specified number of times

The number in brackets at the end of each row indicates the number of stitches in the row.

Happy knitting! Light loops!

Boots-legs (2 parts).

We knit boots with green yarn in a spiral without lifting loops. We fill in the course of knitting. The marker runs along the side of the boot. The boot should be bent with its nose up, which means that it is necessary to ensure that the connecting posts are located one above the other, exactly in the middle. And 10 columns in 11-13 rows form the sole.

1.3sc into magic ring (3)

2.3inc (6)

3.3sl-st, 3sc (6)

4. (sc, inc) * 3 (9)

5.4sl-st, 5sc (9)

6.inc, (2sc, inc) * 2, 2sc (12)

7.6sl-st, 6sc (12)

8. (3sc, inc) * 3 (15)

9.7sl-st, 8sc (15)

10.sc, inc, (4sc, inc) * 2, 3sc (18)

11. (sc, inc) * 4, 10sc (22)

12. (2sc, inc) * 4, 10sc (26)

13. (3sc, inc) * 4, 10sc (30)

14-17. 30sc (30)

18.7sc, 7ch, skip 7 loops from eighth, 16sc (30)

19.7sc, 7sc chain for blo, 16sc (30)

20.sc, dec, (3sc, dec) * 5, 2sc (24)

21. (2sc, dec) * 6 (18)

22. (sc, dec) * 6 (12)

23.6dec (6)

Pull off the ring, fasten the thread, cut off, hide the tip of the thread.

• 

Attach a white thread to the intended inside of the leg to the hole in the boot.

1.14sc (14)

2.for blo 14sc (14)

3.14sc (14)

4-5. red thread 14sc (14)

6-7. white thread 14sc (14)

8-9. red thread 14sc (14)

10-11. white thread 14sc (14)

12-13. red thread 14sc (14)

Next, knit with brown yarn.

14.for blo 14sc (14)

15-26. 14sc (14)

Finish sl-st, fasten and cut the thread.

Boot lapel.

Attach a white thread to the middle of the first row in front of the leg to the untied half-loops. We knit in rotary rows with a lifting loop.

1.14sc (14)

2.turn, ch, (2sc, inc) * 4, 2sc (18)

3.turn, ch, (3sc, inc) * 4, 2sc (22)

4.turn, ch, (4sc, inc) * 4, 2sc (26)

Fasten the thread, cut off, hide the tip.

Hands (2 parts).

We knit our hands first with white yarn in a spiral without lifting loops. We fill only a hand.

1.6sc into magic ring (6)

2.6inc (12)

3. (sc, inc) * 6 (18)

4.inc, (2sc, inc) * 5, 2sc (24)

5-8. 24sc (24)

9. (2sc, dec) * 6 (18)

10. (sc, dec) * 6 (12)

11.for blo 12sc (12)

12.12sc (12)

Next, we knit the handle alternately with red and white yarn.

13-14. red yarn 12sc (12)

15-16. white yarn 12sc (12)

17-18. red yarn 12sc (12)

19-20. white yarn 12sc (12)

21-22. red yarn 12sc (12)

23-24. white yarn 12sc (12)

25-26. red yarn 12sc (12)

27-28. white yarn 12sc (12)

29-30. red yarn 12sc (12)

31-32. white yarn 12sc (12)

33-34. red yarn 12sc (12)

Finish sl-st, fasten and cut the thread.

• 

• 

• 

Lapel mittens.

We attach a white thread to the 10th row to the untied half-loops, we will knit in a spiral without lifting loops.

1. (sc, inc) * 6 (18)

2-3. 18sc (18)

4. (4sc, dec) * 3 (15)

Finish sl-st, fasten the thread, cut off, hide the tip of the thread.

Tail (1 piece).

We knit with brown yarn in a spiral without lifting loops. At the beginning of knitting, leave the thread for attaching the brush 10-12cm.

1.6sc into magic ring (6)

2-26. 6sc (6)

27.fold tail in half and knit 3sc (3)

Fasten and cut the thread.

Make a brush from sand-colored yarn, fasten it to the tip of the tail, comb with a puff.

 Muzzle + head.

We knit the muzzle with sand-colored yarn in a spiral without lifting loops.

We fill in the course of knitting.

1.to dial a chain of 6ch

2.from the second loop from the hook along the chain 4sc, 3sc in one loop, 3sc, inc (12)

3.inc, 3sc, 3inc, 3sc, 2inc (18)

4.sc, inc, 3sc, (sc, inc) * 3, 3sc, (sc, inc) * 2 (24)

5.inc, 5sc, (inc, 2sc) * 3, 3sc, (inc, 2sc) * 2 (30)

6.3sc, inc, 3sc, (3sc, inc) * 3, 3sc, (3sc, inc) * 2 (36)

7-10. 3 6sc (36)

11. (4sc, dec) * 6 (30)

Finish sl-st, fasten and cut the thread.

Change the yarn to brown, attach it to the bottom of the muzzle in the middle. The marker will run in the middle of the head from the bottom to the back

12.for flo (2sc, inc sc) * 2, 2sc, (hdc, inc hdc) * 7, hdc, (2sc, inc sc) * 2, sc (41)

13.2sc, inc sc, 6sc, inc sc, 6hdc, inc hdc, 2hdc, inc hdc, 3hdc, inc hdc, 6hdc, inc hdc, 6sc, inc sc, 3sc (48)

14.7sc, inc sc, 4sc, 3hdc, inc hdc, (7hdc, inc hdc) * 2, 4hdc, 3sc, inc sc, 7sc, inc sc (54)

15.3sc, inc sc, 8sc, inc sc, (8hdc, inc hdc) * 3, 8sc, inc sc, 5sc (60)

16.15sc, 30hdc, 15sc (60)

17-26. 60sc (60)

27. (8sc, dec) * 6 (54)

In the 13th row, insert eyes with felt. There are 5 columns between the eyes. Between the 21st and 22nd rows, we insert a cotter pin with a disc and a washer from the bottom in the middle.

28.3sc, dec, (7sc, dec) * 5, 4sc (48)

29. (6sc, dec) * 6 (42)

30.2sc, dec, (5sc, dec) * 5, 3sc (36)

31. (4sc, dec) * 6 (30)

32. sc, dec, (3sc, dec) * 5, 2sc (24)

33. (2sc, dec) * 6 (18)

34. (sc, dec) * 6 (12)

35.6dec (6)

Stuff your head tightly.

Pull off the ring, fasten the thread, cut off, hide the tip of the thread.